VENTIT FlowOne 160 – single-room heat recovery ventilation unit

VENTIT FlowOne 160

Fresh air. Your configuration.

One FlowOne, three equipment levels. Choose Core, Air or Pure, then select connectivity and the exterior outlet.

The product is still under development and final data may change.

Choose your equipment

• Core: Temperature and humidity sensing directly on the main PCB, light sensor and standard G2 filtration. No additional sensor board.
• Air: Dedicated board with offset temperature and humidity sensing, VOC and CO₂ sensors, light sensor and standard G2 filtration.
• Pure: All Air sensors plus outdoor sensors and a washable electrostatic filter. Fine filtration targets approximately F7.

Included with every FlowOne

All three levels share a ceramic regenerative heat exchanger, Ø160 mm wall tube, servo-operated hinged panel with magnetic closure, infrared remote control, light-based day/night mode and Bluetooth. Standard network connectivity is Wi-Fi.

Connectivity

Wi-Fi is included. The optional Modbus card adds supervisory control and digital inputs, for example a window contact. LAN uses an RJ45 wired network connection instead of Wi-Fi. Modbus and LAN are alternative expansion cards.

Exterior outlet

Choose a white or anthracite wind-deflecting exterior grille, or an offset concealed outlet in the window reveal.

Designed for everyday operation

Designed around guided airflow before and after the fan, an enlarged filter area, accessible maintenance and load monitoring of the fan and servo. The exterior grille and magnetic closure are designed to limit the effects of wind.

Technical overview